![]() Lost or missing activation codes can be retrieved online at Locating the DiSa Numberįor each retrieval method listed above you will need to have your product's DiSa number. ![]() Lost or Missing Activation CodesĪctivation codes are required before the projector is used for the first time. IMPORTANT: Please store your receipt and the activation code in a safe place. Once the code is fully entered, you can begin using the projector. Repeat this process to enter all 6-digits of the activation code.Once you have the correct number displayed, press the volume down button to confirm the number entered.Press the volume up button to scroll through numbers from 0 to 9.These buttons are located on the side of the projector. Digits are entered using the volume up and volume down buttons on the projector. The unique 6-digit activation code can be found on your sales receipt. Once the payment process is finalized, the unique activation code for your product is generated and printed on your receipt. When a Miroir projector is purchased at an authorized retailer, the UPC and DiSa number are scanned at the register. This means you can be assured that the device you purchased is a new authentic Miroir product and that you are purchasing the product from an authorized Miroir projector dealer. Miroir projectors that require activation codes have been digitally locked at the time of production. Devices that require activation can be identified the model number M20 printed on the underside of the projector itself, the date code smaller than 18285 stickered on the underside of the unit, the DiSa number printed on the underside of the unit, and the yellow Product Activation Required logo on the packaging (shown below). NOTE: Miroir M20 projectors with date codes smaller than 18285 require activation, projectors will larger date codes will not require activation. This help article is for users who have a Miroir M20 that requires a one-time activation code. Choose the media you would like to view from the menu on your device and play as you normally would.NOTE: If you are seeing a "No Signal" or not getting an image from your projector, please check out the "No Signal" or No Image from the Projector help article instead.Some devices may not have this ability, but they can still be used with the projector to project videos, photo slide shows, and some app content (this functionality is app dependent). NOTE: After syncing with the projector you may see your device’s screen being mirrored by the projector. Allow the projector 15 to 20 seconds to fully start up and sync with your device.Power on the projector by flipping the power switch to the on position.If no external speaker is connected, the projector’s internal speaker will be used for audio. ![]() If desired, connect a speaker to the 3.5mm audio out jack.NOTE: Some devices may require an adapter to connect to your device. Connect the included HDMI cable to the HDMI port on the projector and the other end to your device.To power the projector with the built-in battery, simply turn the projector on.Once connected, the power indicator light will illuminate red on the projector to show it is connected to power. To power the projector with the Micro USB to USB cable, connect the Micro USB to the projector’s and plug the other end into a USB port.The projector can be powered using the included Micro USB to USB cable or the built-in battery.IMPORTANT: Fully charge the battery before the first use (approximately 3-4 hours). ![]() The blue system indicator light will come on if the battery power is getting low. The built-in battery is charged using the included Micro USB to USB cable.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |